Shandong United Mebong Imp.&Exp.,Co,.Ltd
Home > Knowledge > Content
Selection of medical packaging materials
- Apr 26, 2018 -

Packaging begins with the selection of suitable packaging materials and packaging methods. In addition to the sterilization method, the packaging method should also consider the sterilization items. 

A lot of research has been done, and there are many kinds of medical packaging materials available on the market.

Understanding sterilization methods and packaging requirements can help disinfection supply center personnel to make correct decisions when choosing packaging materials. Usually disinfection

In the case of the centre staff, various packaging materials have been used in the workplace. However, it is precisely because there is no packaging material applicable.

All sterilization methods, therefore, there is a selection process in the specific use.

Only packaging materials that are specifically designed for sterilization and approved by the FDA are available. In addition, for a variety of specific sterilization methods, and.

Here are some basic requirements:

- the pressure steam sterilization packaging materials must be tolerated high temperature of 121 ℃ to 135 ℃, air discharge, and water vapor penetration and packing materials

Drying of included articles;

-- ethylene oxide sterilization packaging materials must allow the penetration and expulsion of ethylene oxide gas (ventilation process);

- dry sterilization packaging materials must be in 2 to 3 hours to tolerate the high temperature of 160 ℃ to 204 ℃, is not melted, burning or other's

Should be.

- plasma sterilization packaging materials must be resistant to extreme vacuum, sterilization, sterilization, and sterilization.

Damage.

In addition to choosing the right packaging materials, the staff at the disinfection supply center should also know how to properly use the packaging materials described above, in order to achieve this.

The sterilizing agent penetration, sterile barrier and sterile opening of the packaging materials are designed.